Tiếng Việt  English
Banner
Turcon® AQ-Seal® 5
Product search
Cart 0
Products
Quantity
Product categories
Brands
Part No.
Installation dimensions
  • Inside Diameter ID
    mm
  • Outside Diameter OD
    mm
  • Groove section H1
    mm
  • Groove Width H2
    mm

Turcon® AQ-Seal® 5

The double-acting Turcon® AQ Seal® 5 incorporates an elastomer Quad-Ring® and is energized by two O-Rings to improve sealing behavior. It demonstrates excellent results in applications requiring media separation, e.g fluid/fluid or fluid/gas.

Hardness
: 50 Mpa

Commercial Description

The double-acting Turcon® AQ Seal® 5 incorporates an elastomer Quad-Ring® and is energized by two O-Rings to improve sealing behavior. It demonstrates excellent results in applications requiring media separation, e.g fluid/fluid or fluid/gas. Works well in higher pressure applications and has a higher sliding speed compared to the AQ Seal®.

Installation & Handling

The Turcon® AQ-Seal® 5 is a patented development of the proven standard Turcon® AQ -Seal® . The seal profile of the Turcon® ring has been redesigned on both the dynamic and static sealing surface. Two O-Rings are used to energize the seal instead of one. The AQ-Seal® 5 combines the benefits of a lowfriction Turcon® slipper seal with the high sealing characteristics of an elastomeric seal by incorporating a limited foot print X-Ring Seal in the dynamic sealing face. This optimizes leakage control while minimizing friction. The particular characteristics of the AQ-Seal® 5 are the special seal profile with a defined seal edge and the use of two O-Rings as energizing elements to optimize the pressure profile and to reduce the force of attack at gas permeability.

Installation dimensions

Material Properties

  • Pressure : Up to 50 MPa Speed : Up to 3 m/s
  • Temperature : -30 °C to +200 °C (depending on O-Ring and X-Ring material)
  • Media : Mineral oil-based hydraulic fluids, flame retardant hydraulic fluids, environmentally safe hydraulic fluids (bio-oils), phosphate ester and others, depending on the seal, O-Ring and X-Ring Seal material compatibility
  • Clearance : The maximum permissible radial clearance Smax. is shown in the table on the next page as a function of the operating pressure and functional diameter.

Seal Capabilities

  • High sealing effect in applications requiring media separation, e.g. fluid/fluid or fluid/gas
  • Double security through the combination of low-friction special materials with elastomer seals
  • Higher pressure application, higher sliding speed compared to the AQ-Seal® Outstanding sliding properties, no stick-slip effect
Part No. ID OD H1 H2 Quantity Pick
PQ0406000-T46N 569.0 600.0 16.3
PQ0405000-T46N 469.0 500.0 16.3
PQ0304500-T46N 432.0 450.0 12.3
PQ0304500-M12N 432.0 450.0 12.3
PQ0304200-T46N 402.0 420.0 12.3
PQ0304200-M12N 402.0 420.0 12.3
PQ0304000-T46N 382.0 400.0 12.3
PQ0304000-M12N 382.0 400.0 12.3
PQ0303500-T46N 332.0 350.0 12.3
PQ0303200-T46N 302.0 320.0 12.3
PQ0303200-M12V 302.0 320.0 12.3
PQ0303200-M12N 302.0 320.0 12.3
PQ0303000-T46N 282.0 300.0 12.3
PQ0303000-M12V 282.0 300.0 12.3
PQ0303000-M12N 282.0 300.0 12.3
PQ0302800-T46N 262.0 280.0 12.3
PQ0302800-M12V 262.0 280.0 12.3
PQ0302800-M12N 262.0 280.0 12.3
PQ0302500-T46N 232.0 250.0 12.3
PQ0302500-M12V 232.0 250.0 12.3
PQ0302500-M12N 232.0 250.0 12.3
PQ0302400-T46N 222.0 240.0 12.3
PQ0302400-M12V 222.0 240.0 12.3
PQ0302400-M12N 222.0 240.0 12.3
PQ0302300-T46N 212.0 230.0 12.3
PQ0302200-T46N 202.0 220.0 12.3
PQ0302200-M12V 202.0 220.0 12.3
PQ0302200-M12N 202.0 220.0 12.3
PQ0302100-T46N 192.0 210.0 12.3
PQ0302000-T46V 182.0 200.0 12.3
PQ0302000-T46N 182.0 200.0 12.3
PQ0302000-M12V 182.0 200.0 12.3
PQ0302000-M12N 182.0 200.0 12.3
PQ0301900-T46N 172.0 190.0 12.3
PQ0301800-T46V 162.0 180.0 12.3
PQ0301800-T46N 162.0 180.0 12.3
PQ0301800-M12V 162.0 180.0 12.3
PQ0301800-M12N 162.0 180.0 12.3
PQ0301700-T46N 152.0 170.0 12.3
PQ0301600-T46V 142.0 160.0 12.3
PQ0301600-T46N 142.0 160.0 12.3
PQ0301600-M12V 142.0 160.0 12.3
PQ0301600-M12N 142.0 160.0 12.3
PQ0301500-T46N 132.0 150.0 12.3
PQ0301500-M12V 132.0 150.0 12.3
PQ0301500-M12N 132.0 150.0 12.3
PQ0301400-T46N 122.0 140.0 12.3
PQ0301400-M12V 122.0 140.0 12.3
PQ0301400-M12N 122.0 140.0 12.3
PQ0301350-T46N 117.0 135.0 12.3
PQ0201300-T46N 117.0 130.0 8.3
PQ0201250-T46V 112.0 125.0 8.3
PQ0201250-T46N 112.0 125.0 8.3
PQ0201250-M12V 112.0 125.0 8.3
PQ0201250-M12N 112.0 125.0 8.3
PQ0201200-T46N 107.0 120.0 8.3
PQ0201200-M12V 107.0 120.0 8.3
PQ0201200-M12N 107.0 120.0 8.3
PQ0201150-T46N 102.0 115.0 8.3
PQ0201100-T46N 97.0 110.0 8.3
PQ0201100-M12V 97.0 110.0 8.3
PQ0201100-M12N 97.0 110.0 8.3
PQ0201000-T46N 87.0 100.0 8.3
PQ0200900-T46N 77.0 90.0 8.3
PQ0200900-M12V 77.0 90.0 8.3
PQ0200900-M12N 77.0 90.0 8.3
PQ0200850-T46N 72.0 85.0 8.3
PQ0200850-M12V 72.0 85.0 8.3
PQ0200850-M12N 72.0 85.0 8.3
PQ0200800-T46N 67.0 80.0 8.3
PQ0200800-M12V 67.0 80.0 8.3
PQ0200800-M12N 67.0 80.0 8.3
PQ0100700-T46N 60.0 70.0 6.3
PQ0100700-M12V 60.0 70.0 6.3
PQ0100700-M12N 60.0 70.0 6.3
PQ0100650-T46N 55.0 65.0 6.3
PQ0100650-M12V 55.0 65.0 6.3
PQ0100650-M12N 55.0 65.0 6.3
PQ0100630-T46V 53.0 63.0 6.3
PQ0100630-T46N 53.0 63.0 6.3
PQ0100630-M12V 53.0 63.0 6.3
PQ0100630-M12N 53.0 63.0 6.3
PQ0100600-T46V 50.0 60.0 6.3
PQ0100600-T46N 50.0 60.0 6.3
PQ0100600-M12V 50.0 60.0 6.3
PQ0100600-M12N 50.0 60.0 6.3
PQ0100550-T46N 45.0 55.0 6.3
PQ0100500-T46N 40.0 50.0 6.3
PQ0100500-M12V 40.0 50.0 6.3
PQ0100500-M12N 40.0 50.0 6.3
PQ0100450-M12V 35.0 45.0 6.3
PQ0100450-M12N 35.0 45.0 6.3
PQ0100400-T46V 30.0 40.0 6.3
PQ0100400-T46N 30.0 40.0 6.3
PQ0100400-M12V 30.0 40.0 6.3
PQ0100400-M12N 30.0 40.0 6.3